2/2 Wege-Sitzventil DN6 PN700

Features

  • Directly actuated directional seat valve controlling pressurised media.
  • The valve seat seals hermetically preventing internal leaks.
  • All parts are made of corrosion-resistant materials, and they are easily replaceable.
  • Valve design in a structural plate form.
  • On request, the valve can be equipped with other actuations than the electromagnet, e.g. hydraulic or pneumatic cylinder actuation, manual pushbutton operation.
  • In addition, the individual actuations can be supplemented with a maintained-contact function.

Function of 2/2-way valve

The force (1), generated by the actuation, acts through the lever (2), the tappet (3) on the ball (4) and presses it out of the valve seat (5). This is used to connect lines P and A, see Example. The ring (6) supports the fl ange seal from the inside. The volume fl ow is limited by the entire fl ow resistance.

Depending on the arrangement of the valve seat (5) and ball (4) the valve will have the basic position normally closed (NC) or normally open (NO).

Technische Daten

gemessen mit HFA-Medium 97/3%, bei 20°C

General

Weight3,5kg
Installation positionany
Ambient temperature-10 to 50°C (hydraulic fluids, heed standard requirements)
Material Valve parts
Material Seals
Stainless steel, bronze except electromagnet
NBR, PTFE

Hydraulic

max. operating pressure of connector P700bar
max. operating pressure of connector A700bar
max. operating pressure of connector T50bar
max./min. control pressure of connector Zsee Order information
max. volume flow P->A15 l/min
max. volume flow A->T15 l/min
specified direction of flowP->A, A->T
Pressure fluid
- Medium - Temperature range
- Medium - Quality
- Cleanliness class, filter fineness
- Viscosity
water, HFA
5 bis 50°C
see Hauhinco requirements on water and HFA media
class 20/18/15, filter fineness 25µm
0,6 bis 100 mm²/s
Pressure fluid
- Medium - Temperature range
- Medium - Quality
- Cleanliness class, filter fineness
- Viscosity
mineral oil, HLP
-10 bis 50°C
acc. to DIN 51524
Class 20/18/15, filter fineness 25µm
0,6 bis 100 mm²/s
Use of other pressure fluids on request.

Elektric

Voltage24 VDC, 110 VAC (96 VDC), 230 VAC (205 VDC)
AC grid, admissible tolerance± 10%
AC grid, admissible frequency50 bis 60 Hz
Power consumption36 W
Operating time100% ED
Degree of protection acc. to EN60529IP65
max. switching rate1 Hz

Included in the scope of supply

Mounting screws of the valveCheese-head screw M8
Cable socket of the valve solenoid
- Supply voltage 24 VDC
- Supply voltage 110 VAC
- Supply voltage 230 VAC
according to DIN 43650 – type of design A
max. 100 VA, LED-Anzeige + Z-diode, IP65
max. 1.5 A, bridge rectifi er, LED display, IP65
max. 1.5 A, bridge rectifi er, LED display, IP65

Ausführungen

BezeichnungNenngrößeMasseMax. DruckGrundstellungSpannungBemerkungArtikelnummer
2/2 -way valve DN6 PN700DN63,5kg700barNC24VDCsolenoid actuation6546811
2/2 -way valve DN6 PN700DN63,5kg700barNC110VACsolenoid actuation6546838
2/2 -way valve DN6 PN700DN63,5kg700barNC230VACsolenoid actuation6546846
2/2 -way valve DN6 PN700DN63,5kg700barNO24VDCsolenoid actuation6546854
2/2 -way valve DN6 PN700DN63,5kg700barNO110VACsolenoid actuation6546862
2/2 -way valve DN6 PN700DN63,5kg700barNO230VACsolenoid actuation6546870

Anfrage zu: 2/2 Wege-Sitzventil DN6 PN700

Sie benötigen weitere Informationen oder haben eine konkrete Anfrage, dann freuen wir und auf Ihre Nachricht. Wir melden uns umgehend zurück.

Gesamtkatalog Ventile anfordern

Wenn Sie unseren Gesamtkatalog "Ventile und Steuerungen" als PDF oder als gedruckte Version anfordern möchten, füllen Sie bitte das nachstehende Formular aus.