• sales@hauhinco.de
  • +49 2324 705-0
Поиск
Close this search box.

3/2 way valve B2 x,y externally actuated DN10-DN16 PN320

  • Operating pressure: 320bar
  • Nominal size(s): DN10, 16
  • Ways: 3/2

Features

  • Hydraulically actuated directional seat valve controlling liquid media.
  • Passively controllable 3/2-way valve with 2-stage control logic
  • The basic valve position is maintained by the hydraulic pressure (P)
  • The valve is designed in two function variants , A-T NO and P-T NO
  • The hydraulic control pressure (X, Y) is applied externally via the connection diagram
  • Valve piston and valve seat are coupled and close hydraulically „leak-free“
  • The valve is actuated hydraulically via a 3/2-way pilot valve
  • Valve fastening structural plate form with a Hauhinco connection diagram

Function of 3/2-way valve AT NO

The valve piston (2) guided within the valve body (1) is pressed into the valve seat (3) by the hydraulic power and the spring force (7) generated by the operating pressure (P) on the control surface (6). Thus, the line (P) is shut o and the lines (A, T) are connected. By switching the pilot valve (5), the control surface (8) is pressurised and the valve piston (2) is moved into the actuated position. Thus, the valve piston (2) is pressed into the valve seat (4), the lines (P, A) are connected and the line (T) shut off . Within the switching phase, the valve is provided with a positive overlap.

Function of 3/2-way valve PA NO

The valve piston (2) guided within the valve body (1) is pressed into the valve seat (3) by the hydraulic power and the spring force (7) generated by the operating pressure (P) on the control surface (9). Thus, the line (T) is shut o and the lines (P, A) are connected. By switching the pilot valve (5), the piston valve area (8) is pressurised and the valve piston (2) is moved into the actuated position. Thus, the valve piston (2) is pressed into the valve seat (4), the lines (A, T) are connected and the line (P) is shut off . Within the switching phase, the valve is provided with a positive overlap.

Technical data

measured with HFA medium 97/3%, at 20°C

General

Weightsee order information
Installation positionany
Ambient temperature-10 to 50°C (hydraulic fl uids, heed standard requirements)
Material Valve parts
Material Seals		Stainless steel, except for the electromagnet
NBR, PTFE

Hydraulic

Hydraulic pressure connector P<= 320bar
Hydraulic pressure connector A<=P <= 320bar
Hydraulic pressure connector T, Y<= 10bar
Hydraulic pressure connector X>= 30bar >=P <= 320bar
Direction of flowP->A, A->T
Pressure fluid
- Medium - Quality
- Medium - Temperature range
- min filter fineness connector P, A
- min filter fineness connector X		Water, HFA
see Hauhinco media requirement, water, HFA
5 - 40°C
Filter fi neness 100µm
Filter fi neness 25µm
Pressure fluid
- Medium - Temperature range
- Medium - Quality
- Viscosity		Mineral oil HLP according to DIN51624-2
5 to 50°C
Cleanliness class -/19/16 according to ISO 4406
0,6 bis 100 mm²/s
Use of other pressure fl uids on request.

Electric

Magnet
- Voltage
- Power consumption
- Operating time
- Degree of protection acc. to EN60529
- max. switching rate
24 VDC
21 W
100% OT
IP65
0,5 Hz

Areas of application

3/2-way valve A-T NO, P-A NOActuation of hydraulic drives (hydraulic cylinder). These valves will particularly be used if due to the medium a separation between the operating and the control circuit is required.
3/2 -way valve P-B NOThe valve works like a hydraulic separator; optionally, it may pass on the supplied pressure and the volume fl ow from line P to line A or B. Thus, optionally pressure can be applied to two different pressure circuits.

Included in the scope of supply

Mounting screws of the valveCheese-head screw
Cable socket of the valve solenoid
- Supply voltage 24 VDC		according to DIN 43650 – type of design A
max. 100 VA

Versions

DescriptionNominal sizeWeightMax. pressureBasic positionVoltageNoteArticle number
3/2-way valve B2 x,y externally actuated DN10 PN320DN107,0kg320barA->T NO24 VDCrequired pilot valve: 65455996270646
3/2-way valve B2 x,y externally actuated DN10 PN320DN107,0kg320barP->A NO24 VDCrequired pilot valve: 65455996270662
3/2-way valve B2 x,y externally actuated DN16 PN320DN1613,5kg320barA->T NO24 VDCrequired pilot valve: 65455996270425
3/2-way valve B2 x,y externally actuated DN16 PN320DN1613,5kg320barP->A NO24 VDCrequired pilot valve: 65455996270441
3/2-way valve B2 x,y externally actuated DN16 PN320DN1613,5kg320barP->A NO24 VDCrequired pilot valve: 65456026259596
3/2-way valve B2 x,y externally actuated DN16 PN320DN1613,5kg320barP->B NO24 VDCrequired pilot valve: 65455996259596
Back to overview
Spec sheet
Inquiry
Catalogue

Контакты

Hauhinco Maschinenfabrik GmbH & Co. KG
Hölterstraße 51
45549 Sprockhövel
Германия

телефон: +49 2324 705-0
телефакс: +49 2324 705-222 
sales@hauhinco.de

Информация и документы

Решения

Продукция и услуги

Hauhinco

Многолетний опыт в сфере проектирования и производства промышленного гидравлического оборудования обеспечил компании знание технологической специфики не только горнодобывающей отрасли, но и многих других сфер промышленности.

Linkedin-in
Up

Enquiry about: 3/2 way valve B2 x,y externally actuated DN10-DN16 PN320

If you need further information or have a specific request, we look forward to hearing from you. We will get back to you as soon as possible.

Request complete valves catalogue

If you would like to request our complete catalogue "Valves and Controls" as a PDF or as a printed version, please fill out the form below.