在Hauhinco传统与创新是互不分离的。Hauhinco是1908年在德国斯普罗克霍威尔，鲁尔矿业的摇篮成立的。至今，Hauhinco仍旧牢记自己的由来。再过去的100余年间，公司经历了很多组织结构和市场环境的变化，并仍旧不断地推陈出新，为市场带来创新性的产品。这些经验使得Hauhinco在市场中独树一帜。
Hauhinco是一家拥有悠久历史的成功的中型公司。如今，Hauhinco是世界领先的水液压应用领域供应商。我们的高压柱塞泵，阀以及系统被广泛地应用于世界各地的井下煤矿以及工业领域。而我们的员工正是我们成功的关键。
中文 (中国)
The generated magnetic force (1) acts via the lever (2), the tappet (3) onto the ball (4) and presses it out of the valve seat (5). This is used to connect lines P and A. The covers (6) support the flange seals from the inside and limits the maximum admissible volume flow. A defined actuating force can be preset (factory setting) by means of the counterspring. The proportional solenoid is electrically activated by regulated current generated as the manipulated variable by the controlled electronic control unit, the Controller RE4. The controlled valve current specifies the degree of opening of the valve, thus, ahydraulic volume flow or pressure control can be performed.
Depending on the arrangement of the valve seat (5) and ball (4) the valve will have the basic position normally closed (NC) or normally open (NO).
General | |
| Weight | 8,5 kg |
| Installation position | any |
| Ambient temperature | -10 to 50°C (hydraulic fluids, heed standard requirements) |
| Material Valve parts Material Seals | Stainless steel, bronze except electromagnet NBR, PTFE |
Hydraulic | |
| max. operating pressure of connector P | 500bar |
| max. operating pressure of connector A | 500bar |
| max. operating pressure of connector T | 50bar |
| max./min. control pressure of connector Z | see order information |
| max. volume flow P->A | 40 l/min |
| specified direction of flow | P->A |
| Pressure fluid - Medium - Temperature range - Medium - Quality - Cleanliness class, filter fineness - Viscosity | Water, HFA 5 bis 50°C see Hauhinco requirements on water and HFA media class 20/18/15, filter fineness 25µm 0,6 bis 100 mm²/s |
| Pressure fluid - Medium - Temperature range - Medium - Quality - Cleanliness class, filter fineness - Viscosity | mineral oil, HLP -10 bis 50°C acc. to DIN 51524 Class 20/18/15, filter fineness 25µm 0,6 bis 100 mm²/s |
| Use of other pressure fluids on request. | |
Electric | |
| Voltage | 24 VDC |
| Power consumption | 21 W |
| Operating time | 100% ED |
| Degree of protection acc. to EN60529 | IP65 |
Included in the scope of supply | |
| Mounting screws of the valve | Cheese-head screw |
| Cable socket of the valve solenoid - Supply voltage 24 VDC | according to DIN 43650 – type of design A max. 100 VA |
| Description | Nominal size | Weight | Max. pressure | Basic position | Voltage | Note | Article number |
|---|---|---|---|---|---|---|---|
| 2/2 Wege-Proportionalsitzventil DN10 PN500 | DN10 | 8,5kg | 500bar | NC | 24VDC | Magnetbetätigung | 6553508 |
| 2/2 Wege-Proportionalsitzventil DN10 PN500 | DN10 | 8,5kg | 500bar | NO | 24VDC | Magnetbetätigung | 6547397 |
Control unit (not included in the scope of delivery of the valve)
Controller RE4, Article number 2336596
Control unit for Hauhinco Proportional seat valves
