• sales@hauhinco.de
  • +49 2324 705-0
Поиск
Close this search box.

Non-return valves B-RV DN6-DN10 PN500

  • Operating pressure: 500bar
  • Nominal size(s): DN6, 10

Features

  • Non-return valve controlling liquid media
  • Opening pressure of the preload spring is „1bar“, other opening pressures on request
  • Valve piston and valve seat are coupled and close hydraulically „leak-free“.
  • Valve fastening structural plate form with a Hauhinco connection diagram
  • Valve parts made of corrosion-resistant stainless steel

Function of Non-return valve

The valve piston (2) guided within the valve body (1) is pressed into the valve seat (3) by the force of the spring (4). The control chamber (5) is connected to the B-channel via the control channels (6) within the valve piston (2). The hydraulic pressure supplied at the B-channel with the valve closed is thus also acting on the control surface (A2). This pressure keeps the valve closed and shuts o the direction of fl ow from the B- to the A-channel. Conversely, the non-return valve opens when the hydraulic pressure at the A-channel exceeds the hydraulic pressure at the B-channel and the spring force (4). In order to reach the initial opening of the closed valve, the hydraulic pressure within the A-channel must be greater by the factor of the control ratio A2/A1. The response behaviour of the valve is dampened by the throttling pin.

Control surfaces, hydraulic forces
A channel: Area A1, open valve
B channel: Area A2, close valve
Control surface (5) = A2 > A1

Technical data

measured with HFA medium 97/3%, at 20°C

General

Weightsee Order information
Installation positionany
Ambient temperature-10 to 50°C (hydraulic fl uids, heed standard requirements)
Material Valve parts
Material Seals		Stainless steel
NBR, PTFE, PUR

Hydraulic

Hydraulic pressure connector P≤ 500 bar
Direction of flowA->B
Control ratioA1≤A2, A1,A2 - Control surfaces
Pressure fluid
- Medium - Temperature range
- Medium - Quality
- min. filter fineness connection		Water, HFA
5 to 40°C
see Hauhinco media requirement, water, HFA
Filter fineness 100µm
Pressure fluid
- Medium - Temperature range
- Medium - Quality
- Viscosity		Mineral oil HLP according to DIN51624-2
5 to 50°C
Cleanliness class -/19/16 according to ISO 4406
0,6 bis 100 mm²/s
Use of other pressure fluids on request.

Included in the scope of supply

Mounting screws for the valves

Versions

DescriptionNominal sizeWeightMax. pressureBasic positionVoltageNoteArticle number
Non-return valve B-RV DN6DN60,9kg500--Control ratio [A2/A1]: 1,356392636
Non-return valve B-RV DN10DN102,3kg500--Control ratio [A2/A1]: 1,356396291
Back to overview
Spec sheet
Inquiry
Catalogue

Контакты

Hauhinco Maschinenfabrik GmbH & Co. KG
Beisenbruchstraße 10
45549 Sprockhövel
Германия

телефон: +49 2324 705-0
телефакс: +49 2324 705-222 
sales@hauhinco.de

Информация и документы

Решения

Продукция и услуги

Hauhinco

Многолетний опыт в сфере проектирования и производства промышленного гидравлического оборудования обеспечил компании знание технологической специфики не только горнодобывающей отрасли, но и многих других сфер промышленности.

Linkedin-in
Up

Enquiry about: Non-return valves B-RV DN6-DN10 PN500

If you need further information or have a specific request, we look forward to hearing from you. We will get back to you as soon as possible.

Request complete valves catalogue

If you would like to request our complete catalogue "Valves and Controls" as a PDF or as a printed version, please fill out the form below.