The force (1), generated by the actuation, acts through the lever (2), the tappet (3) on the ball (4) and presses it out of the valve seat (5). This is used to connect lines P and A, see Example. The ring (6) supports the fl ange seal from the inside. The volume fl ow is limited by the entire fl ow resistance.
Depending on the arrangement of the valve seat (5) and ball (4) the valve will have the basic position normally closed (NC) or normally open (NO).
General | |
Weight | 1,9kg |
Installation position | any |
Ambient temperature | -10 bis 50°C (hydraulic fluids, heed standard requirements) |
Material Valve parts Material Seals | Stainless steel, bronze except electromagnet NBR, PTFE |
Hydraulic | |
max. operating pressure of connector P | 100bar |
max. operating pressure of connector A | 100bar |
max. operating pressure of connector T | 50bar |
max./min. control pressure of connector Z | see order information |
max. volume flow P->A | 15 l/min |
max. volume flow A->T | 15 l/min |
specified direction of flow | P->A, A->T |
Pressure fluid - Medium - Temperature range - Medium - Quality - Cleanliness class, filter fineness - Viscosity | Water, HFA 5 bis 50°C see Hauhinco requirements on water and HFA media class 20/18/15, filter fineness 25µm 0,6 bis 100 mm²/s |
Pressure fluid - Medium - Temperature range - Medium - Quality - Cleanliness class, filter fineness - Viscosity | mineral oil, HLP -10 bis 50°C acc. to DIN 51524 Class 20/18/15, filter fineness 25µm 0,6 bis 100 mm²/s |
Use of other pressure fluids on request. | |
Electric | |
Voltsage | 24 VDC, 110 VAC (96 VDC), 230 VAC (205 VDC) |
AC grid, admissible tolerance | ± 10% |
AC grid, admissible frequency | 50 bis 60 Hz |
Power consumption | 21 W |
Operating time | 100% ED |
Degree of protection acc. to EN60529 | IP65 |
max. switching rate | 1 Hz |
Included in the scope of supply | |
Mounting screws of the valve | Cheese-head screw M6 |
Cable socket of the valve solenoid - Supply voltage 24 VDC - Supply voltage 110 VAC - Supply voltage 230 VAC | according to DIN 43650 – type of design A max. 100 VA, LED-Anzeige + Z-diode, IP65 max. 1.5 A, bridge rectifi er, LED display, IP65 max. 1.5 A, bridge rectifi er, LED display, IP65 |
Description | Nominal size | Weight | Max. pressure | Basic position | Voltage | Note | Article number |
---|---|---|---|---|---|---|---|
2/2-way valve DN3 PN100 | DN3 | 1,9kg | 100bar | NC | 24VDC | solenoid actuation | on request |
2/2-way valve DN3 PN100 | DN3 | 1,9kg | 100bar | NC | 110VAC | solenoid actuation | on request |
2/2-way valve DN3 PN100 | DN3 | 1,9kg | 100bar | NC | 230VAC | solenoid actuation | on request |
2/2-way valve DN3 PN100 | DN3 | 1,9kg | 100bar | NO | 24VDC | solenoid actuation | on request |
2/2-way valve DN3 PN100 | DN3 | 1,9kg | 100bar | NO | 110VAC | solenoid actuation | on request |
2/2-way valve DN3 PN100 | DN3 | 1,9kg | 100bar | NO | 230VAC | solenoid actuation | on request |
Hauhinco Maschinenfabrik GmbH & Co. KG
Hölterstraße 51
45549 Sprockhövel
Германия
телефон: +49 2324 705-0
телефакс: +49 2324 705-222
sales@hauhinco.de
Многолетний опыт в сфере проектирования и производства промышленного гидравлического оборудования обеспечил компании знание технологической специфики не только горнодобывающей отрасли, но и многих других сфер промышленности.