Поиск
Close this search box.

2-2 way seat valve DN10 PN320

Features

  • Directly actuated directional seat valve controlling pressurised media.
  • The valve seat seals hermetically preventing internal leaks.
  • All parts are made of corrosion-resistant materials, and they are easily replaceable.
  • Valve design in a structural plate form.
  • On request, the valve can be equipped with other actuations than the electromagnet, e.g. hydraulic or pneumatic cylinder actuation, manual pushbutton operation.
  • In addition, the individual actuations can be supplemented with a maintained-contact function.

Function of 2/2-way valve

The force (1), generated by the actuation, acts through the lever (2), the tappet (3) on the ball (4) and presses it out of the valve seat (5). This is used to connect lines P and A, see Example. The ring (6) supports the fl ange seal from the inside. The volume fl ow is limited by the entire fl ow resistance.

Depending on the arrangement of the valve seat (5) and ball (4) the valve will have the basic position normally closed (NC) or normally open (NO).

Technical data

measured with HFA medium 97/3%, at 20°C

General

Weightsee Order information
Installation positionany
Ambient temperature-10 to 50°C (hydraulic fluids, heed standard requirements)
Material Valve parts
Material Seals
Stainless steel, bronze except electromagnet
NBR, PTFE

Hydraulic

max. operating pressure of connector P320bar
max. operating pressure of connector A320bar
max. operating pressure of connector T50bar
max./min. control pressure of connector Zsee Order information
max. volume flow P->A40 l/min
max. volume flow A->T40 l/min
specified direction of flowP->A, A->T
Pressure fluid
- Medium - Temperature range
- Medium - Quality
- Cleanliness class, filter fineness
- Viscosity
water, HFA
5 to 50°C see Hauhinco requirements on water and HFA media
class 20/18/15, filter fineness 25µm
0,6 bis 100 mm²/s
Pressure fluid
- Medium - Temperature range
- Medium - Quality
- Cleanliness class, filter fineness
- Viscosity
mineral oil, HLP
-10 to 50°C
acc. to DIN 51524
Class 20/18/15, filter fineness 25µm
0,6 bis 100 mm²/s
Use of other pressure fluids on request.

Elektric

Voltage24 VDC, 110 VAC (96 VDC), 230 VAC (205 VDC)
AC grid, admissible tolerance± 10%
AC grid, admissible frequency50 bis 60 Hz
Power consumption36 W
Operating time100% ED
Degree of protection acc. to EN60529IP65
max. switching rate1 Hz

Included in the scope of supply

Mounting screws of the valveCheese-head screw M10
Cable socket of the valve solenoid
- Supply voltage 24 VDC
- Supply voltage 110 VAC
- Supply voltage 230 VAC
according to DIN 43650 – type of design A
max. 100 VA, LED-Anzeige + Z-diode, IP65
max. 1.5 A, bridge rectifi er, LED display, IP65
max. 1.5 A, bridge rectifi er, LED display, IP65

Versions

DescriptionNominal sizeWeightMax. pressureBasic positionVoltageNoteArticle number
2/2 -way valve DN10 PN320DN108,1kg320barNC24VDCsolenoid actuation6235557
2/2 -way valve DN10 PN320DN108,1kg320barNC110VACsolenoid actuation6241964
2/2 -way valve DN10 PN320DN108,1kg320barNC230VACsolenoid actuation6243649
2/2 -way valve DN10 PN320DN108,1kg320barNO24VDCsolenoid actuation6235565
2/2 -way valve DN10 PN320DN108,1kg320barNO110VACsolenoid actuation6241956
2/2 -way valve DN10 PN320DN108,1kg320barNO230VACsolenoid actuation6243657
2/2 -way valve DN10 PN320DN104,0kg320barNO-pushbutton control with a catch (ca. 100N)6568475
2/2 -way valve DN10 PN320DN104,0kg320barNC-pushbutton control with a catch (ca. 100N)6568483
2/2 -way valve DN10 PN320DN108,1kg320barNC-cylinder actuation pneumatic, hydraulic (adm. control pressure "Z" 3-320bar)6237088
2/2 -way valve DN10 PN320DN108,1kg320barNO-cylinder actuation pneumatic, hydraulic (adm. control pressure "Z" 3-320bar)6237061

Enquiry about: 2-2 way seat valve DN10 PN320

If you need further information or have a specific request, we look forward to hearing from you. We will get back to you as soon as possible.

Request complete valves catalogue

If you would like to request our complete catalogue "Valves and Controls" as a PDF or as a printed version, please fill out the form below.