2/2 way control valve C3 DN25-100 PN500



The pilot valves (5, 6) and the control pcb (8) form the pilot control group of the 2-way control valve. The valve piston (2) guided within the valve body (1) is pressed into the valve seat (3) by the hydraulic power generated by the control pressure (X) on the closing area (5), provided the opening area (4) is depressurised by the activated pilot valve (5). Thus, the lines (A, B) are separated. Activated by the pilot valve (6), the opening area (4) is pressurised and the valve piston (2) lifts off the valve seat (3). The pilot valves (5, 6) are activated according to the controller specification, thus, the valve piston (2) moves into the requested position. The flow cross-section is set analogue to the valve’s piston position. Both proportional pilot valves are 2-way seat valves NC. As soon as the control is switched off, the 2-way control valve remains in the position reached last. If an S/W pilot valve NO (7) is added to the proportional pilot control group, the 2-way control valve is moved into the safe basic position with the control switched off. Pilot valves (5, 6, 7) are fastened to the valve body (1) via the control pcb (8). The basic valve position can also be monitored by a limit switch (9).

Control surfaces, hydraulic forces
A channel: Area A1, open valve passively
B channel: Area A2, open valve passively
Control surface (6): A3, open valve actively
Control surface (5): A4, close valve actively